2Ge6 Petrol engine removal and overhaul procedures

2Ge6 Petrol engine removal and overhaul procedures 2.0 litre engine Big-end side clearance................................:..... 2.2 litre engine Big-end side clearance 2.4 litre engine Big-end side clearance...................................... 2.0 litre engine Main bearing journal diamet Pre 1995 (C20NE) engines.. 1995 on (X20SE) engines. st (0.25 mm) undersize.. 2nd (0.50 mm) undersize Big-end bearing journal (crankpin) 1st (0.25 mm) undersize. 2nd (0.50 mm) undersize. Journal out-of round.... Crankshaft runout. « Main bearing running clearance... Big-end bearing (crankpin) running clearance wi 2.2 litre engine ENGNDAÉ ce anciens ae we wie womens me ae enero nie ae ee oe EE 80 SA BS Main bearing journal diameter: Standard.............. 1st (0.25 mm) undersize 2nd (0.50 mm) undersize Big-end bearing journal (crankpin) diameter: 4st (0.25 mm) undersize 2nd (0.50 mm) under

--- TABLE DES MATIERES / CONTENTS --- 2Ge20 Petrol engine removal and overhaul procedures main bearing ladder casting surfaces are clean and dry. Refit the casting to the engine and (where fitted) the baffle plate and refit the retaining bolts. Working in a diagonal sequence from the centre outwards go around and securely tighten all the retaining bolts 17 On all engines, refit the oil pump strainer, sump and the cylinder head as described in Part A, B or C (as applicable) of this Chapter. 19 Engine - initial start up after overhaul 1 With the engine refitted in the vehicle, levels. Make a final check that everything has been reconnected, and that there are no tools or rags left in the engine compartment. 2 Disable the ignition system by disconnecting the wiring connector(s) from the ignition coil/DIS module (as applicable - see Chapter 5B) and the fuel system by removing the fuel pump fuse (see Chapter 13). Turn the engine on the starter until the oil pressure warning light goes out then stop. Reconnect the wiring and refit the fuse. 3 Start the engine as normal, noting that this may take a little longer than usual, due to the fuel system components having been disturbed. 4 While…