2 3 NC J2 5 6 7 8 9 10
standard), via direct interpolation with a relay output. Any use other than one photocell with the wires inverted with respect to the other photocell. Service the photocells at least every 6 months as follows: 1) release the flector, with modulated opto beam • Power supply/output: 12/24 V /V that described is to be considered improper and prohibited! C - If the “Phototest” function is not used: jumper J3 must be inserted gearmotor as described in the user manual to prevent involuntary activation (limits: 10–35 V and 9–28 V) • Maximum power input: approx. ENGLISH EPMOR devices include a receiver-transmitter element (photocell) and a re- as shown in Fig. 2. of the automation during maintenance; 2) check for humidity, oxidation and 50 mA • Angle of the RX detection area: +/-5° (± 25%) • Output relay Instructions translated from Italian flector; they are able to detect obstacles along the l